Armoured Trencher Ogre (Gas Mask)
This product is a 3D printed miniature using the Formlabs Form 3 SLA Printer.
- 1 x Armoured Trencher Ogre (Gas Mask)
- Height: 41mm to eye level, 46.5mm overall (without base)
This is a Miniature Character from our Over The Top (May) Armoured Trencher Fighters Digital Forge Patreon. The digital renders show the figure we will be printing, and the photograph shows a typical result from our printer.
- This product will have been washed and post-cured before being sent to you.
- You will be required to remove the print supports and assembly may be required - we recommend using superglue for this purpose.
- This product is printed on the Formlabs Form 3. The quality of the print is higher than the common printers used by most hobbyists, but is not as detailed as parts cast in polyurethane resin.
- This product is cured SLA printer resin and has a few distinct property differences when compared to polyurethane resin. It is notably more brittle, responding poorly to bending or twisting forces, and tougher to cut or file.