You have no items in your shopping cart.

Burning Rose Infantry Squad - Advancing Poses (5 miniatures)

Lead time est. 2 weeks
£19.00
SKU: 00-3DP-DBR-ADV
Show All Options keyboard_arrow_down
  • Eagle Pads [+£1.84]
    Eagle Pads [+£1.84]
  • Single Curve Gothic [+£1.84]
    Single Curve Gothic [+£1.84]
  • Renaissance Pauldrons [+£1.84]
    Renaissance Pauldrons [+£1.84]
  • Plate Armour Pauldrons [+£1.84]
    Plate Armour Pauldrons [+£1.84]
Show All Options keyboard_arrow_down
  • Burning Rose Unhelmeted Heads [+£6.30]
    Burning Rose Unhelmeted Heads [+£6.30]

Current estimated lead time: 4 weeks

Please check the box to confirm you understand the following and have read the product description.

+ -

This is a 3D-printed resin product.

Kit includes:

  • 7 Renaissance helmets (5 closed, 2 with visor open)
  • 5 Daughters of the Burning Rose bodies in advancing poses
  • 3 pairs of Daughters of the Burning Rose arms in mixed poses [Rifle Stock]
  • 1 Daughters of the Burning Rose arm with rifle held up (right) [Rifle Stock]
  • 1 Daughters of the Burning Rose arm with a slung Arquebus (left)
  • 3 Daughters of the Burning Rose Open Wrist arms (2 left, 1 right)

 

  • 2 hands pointing (1 left, 1 right)
  • 2 closed fists (1 left, 1 right)
  • 1 hand with Arquebus magazine (left)
  • 5 Renaissance Power Plants

 

  • 5 Arquebus [Rifle Stock]
  • 1 Arquebus without magazine [Rifle Stock]
  • 1 Gothic Flame Thrower [Rifle Stock]
  • 1 Phosphor Lance [Rifle Stock]

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The weapons / arms are compatible with our resin Rifle Stock joint weapons / arms.
The Open Wrist joint arms are compatible with our Regiments melee weapons, pistols and hands.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Not a toy.

Not a toy.
Nije igračka.
Není to hračka.
Ikke et legetøj.
Geen speelgoed.
Ei ole mänguasi.
Ei lelu.
Pas un jouet.
Kein Spielzeug.
Όχι ένα παιχνίδι.
Nem játék.
Ní bréagán.
Non è un giocattolo.
Nav rotaļlieta.
Ne žaislas.
Mhux ġugarell.
Ikke et leketøy.
To nie jest zabawka.
Não é um brinquedo.
Nu o jucărie.
Ni igrača.
No es un juguete.
Inte en leksak.
Не е играчка.
Net e Spillsaach.

 

Product info


Please read the full product safety information and instructions here: https://anvilindustry.co.uk/product-info

 

 

General Safety Warnings


Anvil Industry products are miniature-scale collectibles, they are not toys, and are only suitable for adults.

They should be kept out of reach of children as small parts may be sharp or a choking hazard.

All packaging should be kept out of reach of children due to the risk of choking or suffocation.

Packaging should be disposed of in accordance with local legislation: Cardboard boxes and paper tape are recylable, void fill is startch based and compostable, gripseal bags are made from Polythene (LDPE) and are reusable and recyleable (please check with your local facility).


Product Materials

 

Polyurethane Polymer (referred to as “Resin” or “Cast Resin”)

This material applies to all product SKUs, excluding the ones listed here which are made of other materials (16-C-10 - Magnet Pack, 09-C-7 - Regiments Magnet Pack, All SKUs beginning with “BASE”, All SKUs beginning with “00-3DP”, All SKU's begining with "DF" or "ADF").

Products manufactured in the UK by Anvil Industry, using raw materials from the EU.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


Photopolymer (referred to as “Resin” or “Printed Resin” or “3D Printed”)

This material applies to all SKUs beginning with “00-3DP”.

Products manufactured in the UK by Anvil Industry, using raw materials from China.

Appearance is grey in colour, hard and slightly flexible.

Material is non-hazourdous under normal conditions when fully cured, as shipped to customer.

Material is non-recyclable, and should be disposed of in general waste.


ABS Thermoplastic (referred to as “plastic”)

This material applies to all SKUs beginning with “BASE”.

Products manufactured in the EU by a supplier.

Appearance is black in colour, hard and slightly flexible.

Material is non-hazourdous at room temperature, as shipped to customer.

Material is recyclable along with other ABS plastics.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Patreon Month 2024-07 Daughters of the Burning Rose Infantry
Gender Female
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

This is a 3D-printed resin product.

Kit includes:

  • 7 Renaissance helmets (5 closed, 2 with visor open)
  • 5 Daughters of the Burning Rose bodies in advancing poses
  • 3 pairs of Daughters of the Burning Rose arms in mixed poses [Rifle Stock]
  • 1 Daughters of the Burning Rose arm with rifle held up (right) [Rifle Stock]
  • 1 Daughters of the Burning Rose arm with a slung Arquebus (left)
  • 3 Daughters of the Burning Rose Open Wrist arms (2 left, 1 right)

 

  • 2 hands pointing (1 left, 1 right)
  • 2 closed fists (1 left, 1 right)
  • 1 hand with Arquebus magazine (left)
  • 5 Renaissance Power Plants

 

  • 5 Arquebus [Rifle Stock]
  • 1 Arquebus without magazine [Rifle Stock]
  • 1 Gothic Flame Thrower [Rifle Stock]
  • 1 Phosphor Lance [Rifle Stock]

The neck joints of these models are compatible with our resin Regiments heads and helmets.
The arm joints of these models are compatible with our Female resin Regiments arms.
The weapons / arms are compatible with our resin Rifle Stock joint weapons / arms.
The Open Wrist joint arms are compatible with our Regiments melee weapons, pistols and hands.

 Important Infomation:

  • Only the options shown here are available / included - we cannot customise the kit in any way.
  • The components have had all supports removed, however some additional prep work may be required to smooth surfaces (much like removing mould lines from resin miniatures)
  • Assembly using super glue required. Some parts can be assembled in various poses.
  • We recommend dry fitting before final assembly
  • 3D printed resin has different properties to our regular resin - It tends to be more brittle and cannot be carved or smoothed as easily.

Manufacturing this print-on-demand product might take up to two weeks, and your entire order will be held until the 3d printed parts are ready. 

 

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Fantasy
Medium/ Material 3D Printed Photopolymer
Style / Theme Renaissance
Patreon Month 2024-07 Daughters of the Burning Rose Infantry
Gender Female
Product tags