You have no items in your shopping cart.

Male Militia Arms - Shooting (5) [Pistol Grip]

€5.24
SKU: 09-A-2
In stock
+ -

This product is Five Pairs of Militia/Private Military Contractor Arms, with five unique 'shooting' poses.

They are most compatible with our Regiments torsos and guns, but can be used with many 28mm Heroic Scale miniatures.

Each Arm has an approx 7.5mm wide internal space for the torso. 

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before glueing in place. Some components can be left unglued, be magnetised or held in place with Blu-Tac or similar to allow weapon changes.

For further guidance please see the "Working with Resin" guide at the bottom of the page.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme PMC / Militia
Gender Male
Weapon Attachment Type Pistol Grip With Stock
Existing reviews
As pictured
Harry 11/4/2021 9:55 PM
Suits many other weapons and easy to convert with a bit of experience. Very pleased with these.
Was this review helpful? Yes No (0/0)
Write your own review
  • Product can be reviewed only after purchasing it
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent

This product is Five Pairs of Militia/Private Military Contractor Arms, with five unique 'shooting' poses.

They are most compatible with our Regiments torsos and guns, but can be used with many 28mm Heroic Scale miniatures.

Each Arm has an approx 7.5mm wide internal space for the torso. 

This product is not a toy and is unsuitable for under 14's. They are supplied unpainted, and will require some preparation and assembly with super glue.

We recommend testing the poses and assembly of each miniature in the set before glueing in place. Some components can be left unglued, be magnetised or held in place with Blu-Tac or similar to allow weapon changes.

For further guidance please see the "Working with Resin" guide at the bottom of the page.

Products specifications
Attribute name Attribute value
Scale 28mm Heroic
Category Regiments
Inspiration Modern
Style / Theme PMC / Militia
Gender Male
Weapon Attachment Type Pistol Grip With Stock
Product tags
Blog posts about this product
Conversion Corner - Adam's Black Tusk

Welcome to another Tom Clancy's The Division 2TM inspired Conversion Corner!


With all the Agents in the studio, we needed some bad guys to fight (as if Rogue agents weren't bad enough...), so I decided to finally start one of my long-planned projects, slowly building the enemy factions from both games, starting with the "easiest" one, the Black Tusk.


I started with looking at Black Tusk concept art to see what I would use to build models that evoke the same high-tech PMC feel as the characters in the game. All the units in the faction share some distinct elements - the high-tech body armour, form fitting undersuit, balaclavas, and lots of equipment.


I knew we had the perfect legs and torsos for the project, as I used them before for my Zone Stalkers - from the Recon Drop Trooper range. For the arms I went with Militia and Female PMC as I wanted the short / rolled sleeves present in the game. I decided to split the force up into 3 "unit types", Riflemen, Specialists and Tanks.


Riflemen


Division Black Tusk Assault


These models all wear the same Balaclava and use our HK416s as a modern assault rifle with a lot of accessories. I also added some pouches to the panels on their legs to represent extra equipment carried. To hide the sci-fi details on the back of the torso I glued some of our 3D-printed prototype Hydration Backpacks on, and I stuck some plasticard on our small radios from the Modern Equipment pack to represent the touch screen comms gear all Black Tusk operatives seem to carry.

 
Division Black Tusk Assault


Specialists


Division Black Tusk Controller , Sniper , Medic

Division Black Tusk Controller , Sniper , Medic


The specialists are 3 unique models to represent some of the enemy classes in the game. I had concept art for all of these, so I tried to get as close as possible.

  • The Controller uses a Kel-tec KSG glued on a Militia arm with the stock removed, his other arm is from the Drone Controller pack with the Drop Troop Commander's arm console. His backpack is a Phase Lance powerpack with the antenna from a Field Radio. Making his head was probably the biggest challenge in the entire project, as it is a Boonie Hat spliced together with the VR goggle head from the Drone Controllers.
  • The Sniper is a pretty straightforward build with a digitally kitbashed Hoodie-Baseball Cap-Sunglasses-Face covering head from the Undercover Operatives pack, and a long barrel HK416 DMR variant with a 12x Scope and a wrapped suppressor.
  • The Medic required some creative use of parts! I used the largest backpack I could find (from Modern Civilians), split the bottom shell to use as the medic pouch on the leg, then grabbed a flying Drone and scaled it down to fit. Just sticking a drone on the backpack wouldn't work, and I didn't want to sculpt a drone rail, so after a lot of trial and error I ended up using a part from our poseable Light Mech legs!


Division Black Tusk Controller Drone


 Tanks

 
Division Black Tusk Tank


For these, I went for a different base body, from the Corporate Security Force core pack and Booster

  • The Minigun model uses the body from the CorpSec character with ram, and Man-Portable Heavy Weapon arms, as I wanted a heavy advancing pose. The minigun ammo feed was too short to reach the backpack with this pose, so I cut two in the middle and spliced them together.
  • The Grenade launcher arms are from the Republic Commando booster pack, with digitally cut CorpSec armour plates overlaid. 

I finished both models with OpsCore helmets, and I didn't forget to add the "shoot me here for extra damage" little red box to the backs!


Division Black Tusk Tank


 Drones


Division Black Tusk Marauder War Hound


The original plan was 3 unit types, but I thought something was missing - then I remembered how scary those military Big Dogs were in the game, so I had to build one!


Division Black Tusk Marauder War Hound


The bases were made using my usual method - 50mm base from Marvel Crisis Protocol, 35mm ones are printed bases designed by Nuclear Firefly. I added extra detail to them using sandpaper, Citadel Astrogranite technical paint and printed basing elements from the Modern Urban Scatter Terrain bundle, spent ammo casings and bottles.

 


That's all for now, hope you enjoyed this Conversion Corner, see y'all later!


The Division and all associated terms are trademark and Copyright Ubisoft.

Comparisons and images are used to provide examples of possible conversions to inspire hobbyists own modelling projects. This feature is not associated with Ubisoft in any way.